High Temperature Range Grease

Colorless
Odorless
FDA approved and USDA Listed H1+
Excellent dielectric
Contains PTFE
Will not freeze, melt, gum up
Compatible with other lubricants
No silicones
Will not wash out
NLGI#2
Repels water. Will not separate, run, fall out. Thixotropic properties provide excellent mechanical stability when sudden temperature changes occur. Exceptional load-bearing properties. Clear, clean, non-yellowing grease. For injection molds, mold assemblies, especially medical and food grade plastic parts. Prevents corrosion.
Operating Temperatures.: -45F to +650F.

No. 43916T
Net Wgt 16 oz. (16 fl. oz.).

No. 43900T
14.5 oz. Tube

No. 43900-03
3 oz. tube

No. 43900-07
7 lbs. container

No. 43900-35
35 lbs. container

No. 43900-400
400 lbs. container

+ Rating applies to grease tube cartridge & 3 oz. tube.
USDA H1 rating: For use in federally inspected meat and poultry plants.
Econo-Spray(R) Pin & Lube Grease
Keep it quiet, keep it smooth with Econo-Spray Pin Lube & Grease.

Contains rust and oxidant inhibitors
NLGI Grade #2 grease
No methylene chloride
No Chlorofluorocarbons (CFC's)
Econo-Spray(R) Pin Lube & Grease is a white lithium grease that protects equipment by reducing the friction and sticking that can cause pre-mature wear and hinder productivity. It can be used on metals, glass, some plastics and rubbers and more. Pin Lube and Grease is ideal for knock-out pins where part marking could be a problem. It can be used on all moving parts such as slides or cams, stripper plates, guide pins, etc. or any place where binding, galling and seizing can occur. A heavy-duty grease, it is water resistant, protects against corrosion and works at a wide range of temperatures.
Maximum Operating Temperature: 400F

No. 46011T
Net Wt. 11 oz.

No. 4600-007
7 lbs.

No. 46000-35
35 lbs.

No. 46000-400
400 lbs.
Silicone Spray Lube
MADE WITH FDA APPROVED SILICONE

All-around lubricant
Use on machinery of all types, chains, gears, cutting tools, threaded connections, drilling, assembly, bearings, hinges, locks, windows, zippers, sewing needles, household appliances, sporting goods, fabrics (including synthetics), metal runners, sewing needles, cameras and more. Especially recommended for sliding wood surfaces. For use on stainless steel and aluminum. Removes water spots. Approved as indirect food additive.*
Maximum Operating Temperature: 600F

No. 42112N
Net Wt. 12 oz. (16 fl. oz.).

No. 42101B
1-gallon size

No. 42105B
5-gallon size

No. 42155B
55-gallon drum

Recognized by Underwriters Laboratories
*Lubricants are suitable for food contact use as indicated in Title 21 of the code of Federal Regulations.
Heavy-Duty Mold Release and Pin Lube
Non-silicone
Paintable
Food-approved*****
Dry release minimizes leaching out onto parts
An ideal lubricant for the front half of ejector pins (pins in forward position,) this almost dry lubricant minimizes the possibility of leaching out onto molded parts. Use in combination with application of Super Grease on back side of ejector pins. Stable at temperatures up to 400°F. Heavy-Duty Mold Release and Pin Lube can be used on plastics, rubber, waxes, glass-filled nylon and similar materials.
Maximum Operating Temperature: 400°F.

No. 54912
Net Wt. 11.5 oz.

NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.