Mold Cleaner Plus Degreaser III Mold Cleaner

Request a quote
Mold Cleaner Plus Degreaser III Mold Cleaner
 
NO METHYLENE CHLORIDE

  • No chlorofluorocarbons (CFC's)


  • No 1,1,1 Trichloroethane


  • Meets all current EPA and OSHA Regulations

Slide(R) Mold Cleaner Plus Degreaser III provides a convenient method for removal of silicones, grease, oil and wax build-up on mold surfaces, etc. without the need for wiping. Ideal for cold molds, it leaves no residue so it cleans without wiping. It has a fast evaporating formulation and is non-flammable, non-conductive and non-abrasive.

No. 45920

Net Wt. 20 oz. (16 fl. oz.).

No. 45901B
1-gallon size

No. 45905B
5-gallon size

No. 45955B  
55-gallon drum

No. 45960
cylinder

Resin Remover Mold Cleaner

The Stripper(R)


  • Removes resin build-up from polyacetals, urethanes and flame-retardant mold deposits


  • Removes most color deposits

Compounded with powerful solvents to remove resin build-up on molds. This build-up can be stripped without removal of mold (injection or transfer). Will remove, strip and/or aid in the removal of many resinous plastics. Mold off deposits with mold temperature above 180F. Discard next 3 to 4 shots. For flame-retardant resins - apply Slide mold release before attempting this procedure.
No. 41916T
Net Wt. 16 oz. (16 fl. oz.).

No. 41901B
1-gallon size

No.  41905B 
5-gallon size

No. 41955B
55-gallon drum

NEXGEN Cleaner


  • Direct alternative to Trichloroethylene and Methylene chloride


  • Leaves no oily residue


  • No global warming compounds


  • Not a hazardous air pollutant (not HAP)


  • Non-corrosive and not SARA reportable


  • Biodegradable and rinses with water


  • Meets tough health, safety and


  • environmental regulations***


  • High solvency for resins, polymers and dies

NEXGEN is the most extraordinary cleaning product available. Formulated purely from citrus and vegetable products, it is much more than you might have experienced with previous "natural" cleaners. It meets or exceeds the toughest health and safety issues, without sacrificing RAW CLEANING POWER. Biodegradable, it easily rinses away with water and leaves no residue. Use it for: General cleaning and wiping, oil spill clean-up and remediation, dewaxing, paint line flush and clean-up, ink, tar and adhesive removal, paint and graffiti removal, removing silicone and lithium grease, degreasing.
No.  46410
Net Wt. 10 oz. (16 fl. oz.)

No.  46401B
1-gallon size

No. 46405B
5-gallon size

No. 46455B
55-gallon drum

On/Cycle Mold Cleaner
AT THE PRESS WARM/MOLD CLEANER


  • No chlorinated solvents


  • Food Approved (GRAS)*


  • Will not stain aluminum


  • Multi-purpose cleaning as well as equipment cleaning


  • No caustic or acidic compounds


  • Use on ordinary soil stains and most painted surfaces

The ideal mold cleaner while in production. Works on warm molds up to 150F. Easily removes releases, oils, greases and many resinous build-ups before they can become a problem. Made from citrus oils which destroy odors and also give it a pleasant orange scent.
No. 44212
Net Wt. 12 oz. (16 fl. oz.).

No. 44201B
1-gallon size

No.  44205B
5-gallon size

No. 44255B
55-gallon drum

No. 44235
cylinder

Federal Definitions and Standards of Identity for Food *21CFR184.1521 (G.R.A.S.)

Econo-Spray(R) Mold Cleaner
APPROVED FOR INDIRECT FOOD CONTACT*


  • Food approved


  • No chlorinated chemicals


  • Very low odor

Mold cleaner quickly removes silicones, grease, oil and wax build-up on mold surfaces. It is also good for clean-up of non-operating electrical equipment and general degreasing on machinery. Safe on solvent-sensitive plastics.
No. 45612
Net Wt. 12 oz.

No. 45601B
1-gallon size

No. 45605B
5-gallon size

No. 45655B
55-gallon drum
*FDA Regulation 21 CFR 172.882, 172.884, 178.3530, 178.3650; 40 CFR 180.1001 (c) & (e)

Veri-Kleen Contact Cleaner
CONTACT & METAL CLEANER


  • Will not harm rubber or paint, etc.


  • Excellent contact cleaner and flux remover


  • Ideal for circuit boards, tape heads, motors and a variety of metal cleaning applications


  • No flammable ingredients

Veri Kleen uses all EPA SNAP approved ingredients and is 100% VOC exempt. It has a very mild odor. Can be used safely on operating electrical equipment, leaving no residue after evaporating.
No. 42012A
Net Wt. 12 oz.

Polish Cleaner Mold Cleaner
OLD YELLOW


  • Removes stains and mold deposits


  • Conditions your mold for faster startups and improved release properties


  • Protects as it cleans


  • Does not contain diamond dust


  • Particle size <5 microns


  • Handy plastic squeeze bottle

Use on all metal molds for removal of stains and discoloration. Can be used on cold or warm injection molds. Leaves a non-transferring, micron-thin film that reduces mold wear. Reduces the need for all types of internal and external release agents.
No.  43310 Case of 12

Silicone Remover Plastic Parts Cleaner
CONCENTRATE FOR USE WITH WATER


  • Completely removes all traces of silicone

A specially formulated wetting agent to be mixed with water to remove silicone from molded plastic parts through repeated washing or by the use of an ultrasonic cleaning bath. It is designed to replace organic solvents that are harmful to certain plastics, such as polycarbonates, styrenes and acrylics.
No.  43016
Net Wt. 16 oz.

Bare Metal Mold Cleaner
METAL CLEANER AND DEGREASER


  • Non-flammable and non-conductive


  • Leaves no residue


  • Contains no methylene chloride


  • Contains no 1,1,1 trichloroethane

Bare Metal is ideal for metal fabricators, tool and die operations, and anyone who needs to clean metal. It removes grease, oil, wax, tar and other contaminants on tools, motors, bearings, generators, control panels, power tools and more. Just spray then wipe away the overflow, or simply allow it to dry. Bare Metal leaves no residue. Bare Metal is ideal for removing silicones and other contaminants from mold surfaces. Not intended for automotive applications
No. 45016
Net Wt. 16 oz.

Plastic Cleaner Mold Cleaner
With FOAMACTION(TM)


  • Just spray and wipe clean


  • No ozone depleting chemicals


  • Safe on all plastics


  • Cleans without leaving film or residue


  • Pleasant, fresh scent


  • Non-flammable, water-based cleaner with low VOC's


  • Contains no ammonia

Plastic Cleaner uses FOAMACTION(TM) foaming spray to effectively remove oil and dirt marks from all plastics, even sensitive polycarbonates. Just spray and wipe clean, then polish with a clean, dry cloth. Plastic Cleaner is idea for cleaning plastic parts, and helps remove mold releases prior to secondary operations. Plastic Cleaner also works as a general purpose cleaner and can be used to clean: safety gate doors and molding machine, tile and procelain, chrome, glass & mirrors, even metal (use one of Slide's rust preventatives to provide long-term protection on metal surfaces).
No. 41515
Net Wt. 15 oz. (16 fl. oz.).

No. 41570
Canister of 70 wipes.
 

Citra Cling Mold and Metal Cleaner
THICK FOAMING METAL CLEANER


  • No chlorinated solvents


  • No petroleum distillates or glycol ethers


  • 99% biodegradable


  • Clings to surfaces for maximum performance


  • Non-toxic high density foam


  • Removes mold release, dirt, oil and greases


  • Cleans almost all surfaces

Citra Cling is an excellent cleaning agent that clings to even vertical surfaces. Superior clinging action allows for maximum cleaning. Water-based cleaner is 99% biodegradable and safe to use on painted surfaces and plastic parts (pre-testing recommended).
No. 46515
 
Quick Mold Cleaner
CLEANS QUICKLY WITHOUT WIPING

  • Contains no ozone depleting chemicals


  • Non-chlorinated


  • No methylene chloride


  • Recommended for use on molds at room temperature


  • No Chlorofluorocarbons (CFC's)

Quick Mold Cleaner effectively cleans molds at room temperature without wiping. It removes silicones, grease, oil and wax build-up on mold surfaces, etc. It leaves no residue, so it cleans without wiping. Its fast-evaporating formulation helps maximize the productivity of your operation.

No.40910

Net Wt. 10 oz. (16 fl. oz.)

Mold & Metal Wipes
PRE-SATURATED CLEANING TOWELS


  • Quickly removes releases, grease, oil and more


  • Replaces hazardous cleaning solvents including 1,1,1 trichlorethane


  • Ideal for precision cleaning and routine maintenance


  • Dries quickly and has very mild fragrance

Fast, convenient, pre-saturated sheets quickly clean almost any surface*. Use for preparing molds for production or storage; touch-up cleaning during production; surface prep prior to secondary operations; and general maintenance and all-purpose cleaning. Using wipes reduces solvent consumption and VOC’s emissions.
*Pre-test on non-metal surfaces

No. 46370
canister of 70 wipes

No. 46301
Box of 50 single-wipe packets

Mold & Metal Polish
CLEAN AND RESTORE SURFACES


  • Easily wipes on and off


  • Removes plate-out, oxidation and stains


  • Leaves no residue


  • Brings surfaces to a high luster


  • Use with most resins to produce a superior finish

Mold & Metal Polish safely removes plate-out, oxidation and stains on fine tooling surfaces quickly and cost-effectively. Ideal for all types of molds, dies and fixtures, it restores surface finish, while providing a high luster sheen. It is also easier to remove than other polishes, and wipes on and off without leaving a residue. Applied with a soft cotton cloth or buffing wheel, it cleans and shines surface cavities and cores stained during plastics processing or fabrication. The polish has proven effective on steel, stainless, aluminum, brass, bronze, beryllium, kirksite, zinc, powdered metals and other materials used in injection, blow, extrusion, compression, and rim molding.

Non-hazardous and non-corrosive, it cleans and shines diamond finished molds safely, without causing spiral webs, cattails or other fine surface scratches. It also cleans and shines acrylic, polycarbonate and other resins to a finish superior to the original molded, extruded or cast surface.

Mold and Metal Polish can also be used to clean screws, spruce bushings, and other molding and fabricating components.

No. 45210



10 ounce can

No.  45202
1.76 ounce tube



 

NOTICE TO PURCHASER: User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.

Cleaning Products

© 2013 NovaTech,  All rights reserved. | mgmt | staff | admin